 | High-production throughput for tube, rod, or bar stock (polishing centerless)acme centerless belt grinding systems provide continuous high-production throughput at minimized operating costs. The systems use improved abrasive belt technology combined with either single or multiple head sequential belt grinding, integrated with proven part handling automation. Numerous acme systems are in operation processing:
tubing up to 12 in. Od (300mm)
bar stock up to 6 in. Od (150mm)
rod and tube as small as . 060 in. Od (1. 5mm)
lengths as short as 2 in. (50mm) and as long as 20 feet (6m)
advantagesthe capability for continuous through-feed in "one pass" is combined with high speed rates up to 100 feet per minute (30 meters per minute). Productivity is high.
quality is consistent, with high part-to-part and setup-to-setup repeatability. There is no distortion of the workpiece, since it is supported by the regulating wheel and the work rest blade. Forces in the cutting area are low, minimizing heat and distortion of thin wall tubing, while a flood of coolant dissipates heat and removes grinding swarf for improved belt cutting action. Abrasive belts run cooler for wet or dry operations due to the large abrasive cutting surface of the belt.
unlike bonded grinding wheels, abrasive belts require no dressing, eliminating time and cost. Belt/wheel changeover typically takes less than one minute.
machine setup and changeover to a different diameter tube or bar via cnc / servo-motor control permits rapid setups within two to five minutes for multiple belt head operations.
products processed include hydraulic cylinder rods and tubes (telescopic); motor rotors, stators and other cylindrical components; nuclear fuel rods and tubes (titanium and zirconium); pipes, chrome shafts and cold-drawn bars; glass or composite rods and tubes. |
